- sales@toponew.com
- +86 0512-65128852-801
Ошибка формата электронной почты
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
POM TYM270
MI: 27 g/10min
(Custom materials available according to your Technical Data Sheet)
- Информация о продукте
-
Download
Customizable Materials Available:
- Color (Customization of plastic pellet color according to your requirements.)
- Flame retardant grade (Let us know which flame retardant level you need: 0.8mm-3.0mm HB, V0, V1, V2, 5VA, 5VB)
- Glass fiber reinforcement material (10%-50% availability)
- Carbon fiber reinforcement material (10%-50% availability)
- UV resistance property (Tell us the application scenarios or UV resistance level of the materials )
- Other materials can also be customized ( Just need to provide your Technical Data Sheet. )
Technical Data Sheet of POM TYM270
Cheap Engineering Plastics POM Granule Resin POM
POM (polyoxymethylene, also known as polyacetal or acetal) is generally a highly crystalline thermoplastic. It has good mechanical properties, high dimensional stability, and wear behavior. Also, high strength and low coefficient of friction are significant and advantageous characteristics of POM plastics. The POM is recyclable, and the main properties are maintained in the recycled POM (R-POM) if properly treated.
The Feature of POM Polyoxymethylene Resin
- Appearance: POM raw material appearance is light yellow or white translucent or opaque powder or granules. Hard and dense, similar to ivory, the product surface is smooth and lustrous.
- Flammability: Flammable, after the fire can continue to burn. Its oxygen index is only 14-16. the upper end of the flame is yellow and the lower end is blue.
- Breathability: The permeability of POM raw material is very small, only a fraction of PE.
- Shrinkage: The high crystallinity of POM raw material leads to shrinkage of up to 2% to 3.5%.
- Mechanical properties: POM raw material has good mechanical properties, high modulus of elasticity, low coefficient of friction and stability, good wear resistance, and good self-lubrication. Hardness and stiffness are very high, very close to the metal.
- Heat resistance: POM raw material heat resistance is poor and easy to degrade under the molding temperature release acetaldehyde. Usually, in the granulation process to add stabilizers are. Heat deformation temperature is high, homopolymerization degree is high at 136°C, and copolymerization degree is 110°C. In 220 above ℃ decomposition of formaldehyde gas, can be used in 140 ℃ short-term, and long-term use temperatures of -40-100 ℃.
- Excellent mechanical properties over a temperature range upto 140°C, down to -40°C
- High tensile strength, rigidity, and toughness (short-term)
- Low tendency to creep (as compared to nylon) and fatigue (long-term). Not susceptible to environmental stress cracking
- High degree of crystallinity and excellent dimensional stability
- Excellent wear resistance
- Low coefficient of friction
- Good resistance to organic solvents and chemicals (except phenols) at room temperature
- Low smoke emission
- High gloss surfaces
- Low moisture absorption
Introduction to POM Plastic Material:
POM, short for Polyoxymethylene, is a versatile engineering plastic widely known for its excellent mechanical properties and dimensional stability. As a trusted supplier of modified plastic granules, TOPONEW provides high-quality POM materials.
POM Plastic Price:
The price of POM plastic can vary depending on factors such as market demand, quantity ordered, and supplier. For accurate pricing information, it is recommended to contact TOPONEW or other reputable suppliers in your region.
POM vs ABS Plastic:
When comparing POM and ABS plastics, there are a few notable differences. POM offers higher stiffness, strength, and dimensional stability compared to ABS. It also exhibits excellent resistance to chemicals and abrasion. On the other hand, ABS has better impact resistance and is generally more cost-effective. The choice between POM and ABS depends on specific application requirements.
POM Plastic Density:
The density of POM plastic typically ranges from 1.41 to 1.43 g/cm³. This density contributes to its mechanical properties, making it a desirable material for applications where strength and rigidity are crucial.
Is POM Plastic Recyclable?
POM plastic is generally not widely recyclable due to its chemical structure and specialized processing requirements. However, efforts are being made in some regions to develop recycling methods for POM materials. It is recommended to consult with local recycling facilities or waste management authorities to determine the availability of recycling options in your area.
POM Plastic Meaning:
POM is an acronym for Polyoxymethylene, indicating its chemical composition. It is also known by other names, such as acetal resin. POM plastic offers a balance of mechanical properties, chemical resistance, and dimensional stability, making it suitable for various industries and applications.
As a plastic resin pellets supplier in the industry, we are dedicated to providing high-quality POM pellets that meet your specific needs.
We understand the importance of having comprehensive information about the material you require. To ensure we provide you with the most accurate and relevant quotation, we kindly invite you to share the Technical Data Sheet (TDS) or any specific property requirements for the POM plastic pellets.
Download
-
拓扑新材料 POM YTHM270.pdf
Download 拓扑新材料 POM YTHM270.pdf
